
GX-SP-02
Pre-Filter

Model Number: GX-WD-001
Help protect water heaters, showerheads, faucets, pipes, and water-using appliances from stubborn mineral scale—without hauling salt bags or adding a drain.
One compact system. Whole house. GX-WD-001 installs on the main line and helps reduce mineral scale adhesion with no electricity, regeneration, or chemical dosing. It keeps calcium and magnesium in the water, so it is scale control—not a water softener.
SALT-FREE WHOLE-HOME SCALE CONTROL
3-Year Warranty


Pre-Filter

Scale Control

Water Softener

Filtration

Helps reduce mineral scale buildup on plumbing, fixtures, heaters, and appliances.

Scale control begins at the main line before water reaches household fixtures.

Hardness and TDS readings do not decrease because minerals remain in the water.






Whole-house scale inhibitor
Helps reduce the tendency of mineral scale to form stubborn, adhesive deposits.
G 3/4 in / G1 in connection options. Confirm local pipe-thread and adapter compatibility before installation.
Recommended listed flow:
3.0 m³/h / 13.2 GPM.
Listed product weight:
0.95 kg / 2.09 lb.
Durable metal housing for in-line residential installation.
Hardness ≤450 mg/L as CaCO₃ (about 26.3 gpg); pH 3–10;
TDS ≤800 ppm; iron ≤2 mg/L (about 2 ppm).
Confirm actual site pressure, pressure surges, and local plumbing requirements before installation.





Install at the residential point of entry where whole-home flow can pass through the unit.
Use suitable pre-filtration first when sediment, rust, sand, or visible particles are present.
Confirm DN20 / DN25 connection compatibility and G 3/4 in / G1 in fittings before installation.
Use within the listed 0.6–4.0 m³/h / 2.6–17.6 GPM flow range; 3.0 m³/h / 13.2 GPM is the listed recommendation.
Confirm pressure, water quality, orientation, and service clearance with a qualified installer and the product manual.
Model-specific installation instructions.
Request Installation InstructionsGet help with model-specific installation steps.
Get Installation Support

GX-WD-001 is designed for scale control while keeping naturally occurring minerals in the water.
If your goal also includes lowering measured water hardness, add a GX-WS Series water softener to the treatment plan.
WD001 is designed for mineral scale adhesion. It helps reduce scale buildup on pipes, water heaters, showerheads, fixtures, and water-using appliances.
No. It does not remove calcium or magnesium and is not expected to lower measured hardness or TDS.
Not necessarily. Choose WD001 for scale control and a water softener when the required result is reduced hardness.
Normal operation does not require salt, electricity, regeneration, a drain line, or chemical dosing.
Confirm peak flow, DN20 / DN25 compatibility, and the required G3/4 inch or G1 inch connection.
It does not filter sediment, remove chlorine or dissolved chemicals, disinfect water, produce RO water, or soften water.
Sign in to your Glonyx account before writing a review.
Have this GLONYX system at home? Tell us about your installation and everyday use.
No reviews yet.